All studies
Metabolism·November 6, 2026·6 min read

How Do I Calculate My APRI Score and Which AST Upper Limit Do I Use?

APRI is AST divided by your lab's own AST upper limit, times 100, divided by platelets. Here is the arithmetic, the unit traps and how to read the result.

To calculate your APRI score, divide your AST by the AST upper limit printed on your own lab report, multiply by 100, then divide by your platelet count in ×10⁹/L. The upper limit should come from the same report as the AST, because it differs between labs and the answer moves with it. Use the range printed on that report, the one for your sex if it prints two, and ask the lab if there is none. The result is a pointer to liver scarring risk, not a diagnosis.

How do I calculate my APRI score from my blood test?

The formula is APRI = (AST ÷ AST upper limit of normal) × 100 ÷ platelets. It comes from Wai and colleagues (Hepatology, 2003), who built it in people with chronic hepatitis C and compared it with liver biopsy.

Find three numbers on the report:

  • AST (also called SGOT or aspartate aminotransferase), in U/L.
  • The AST reference range, specifically its top value. This is the upper limit.
  • Platelets (PLT, thrombocytes), in ×10⁹/L.

A worked example: AST 60 U/L, the lab's range runs up to 40, platelets 150. First 60 ÷ 40 = 1.5. Then 1.5 × 100 = 150. Then 150 ÷ 150 = 1.0. Your APRI is 1.0.

The first step, dividing AST by the upper limit, is what turns your AST into a multiple of normal. An AST exactly at the limit gives a ratio of 1 before the ×100 and platelet steps.

Why the AST upper limit has to come from your own report

AST is an enzyme that leaks out of liver cells (and muscle and heart cells) when they are damaged. How much counts as normal depends on the lab's analyser, its reagents, the temperature of the assay and the population its range was drawn from. Printed upper limits commonly sit somewhere in the 30s to 40s U/L, and some labs print separate limits for men and women.

So the same blood, run at two labs, can give different APRIs. Here is the same person (AST 40, platelets 250) against four different limits:

Same blood (AST 40 U/L, platelets 250), different lab AST upper limit
Limit 30 U/L0.53APRI
Limit 35 U/L0.46APRI
Limit 40 U/L0.4APRI
Limit 45 U/L0.36APRI

The spread is 0.36 to 0.53, and 0.5 is a commonly used cutoff. Nothing about the liver changed between those bars.

If your report prints a sex-specific range, use the one for your sex. If it prints no upper limit at all, ask the lab for theirs. If you cannot get it, 40 U/L is a generic assumption that may differ from your lab's real limit, so the result only gives a ballpark. Label it approximate, and do not compare it against the 0.5 cutoff as if it were exact, since the figure above shows how a different limit can move a result across that line.

Platelet units catch people out

The formula expects platelets as a count in thousands. These all mean the same number: ×10⁹/L, ×10³/µL, K/µL and 1000/mm³. A platelet count of 250 in any of them goes straight into the formula.

The error comes when a report gives the full count, such as 250,000 per µL. Enter that raw and your APRI comes out 1000 times too small. Divide by 1000 first. Some labs, notably in Japan, report in ×10⁴/µL, where a typical value looks like 25, and you multiply by 10 to get back to ×10⁹/L. Others report in ×10¹²/L, where a typical value looks like 0.25, and you multiply by 1000.

A quick sanity check: with a normal AST and normal platelets, APRI lands well under 1, often 0.2 to 0.5. For an AST at the upper limit, entering platelets as the full count of 250,000 gives about 0.0004, and entering them as 0.25 (the ×10¹²/L value) gives about 400. A result near either of those is almost certainly a units slip, not a finding.

What the cutoffs say, and what they don't

Why platelets? Scarring slows blood through the liver and raises pressure in the portal vein, so the spleen holds back more platelets. The liver also makes thrombopoietin, the hormone that drives platelet production, and a damaged one makes less. AST tends to rise as well, partly because the liver clears it less well. Both signals push APRI up together, which is why the ratio picks up more than either number alone.

Published APRI cutoffs
Significant fibrosisCirrhosis
Wai 2003, rule out≤0.5≤1.0
Wai 2003, likelyAbove 1.5Above 2.0
WHO 2015 hepatitis BAbove 0.5Above 2

Scroll the table sideways for the rest →

Wai 2003 was studied in chronic hepatitis C; its rule-out cutoffs are at or below the value shown. The WHO 2015 thresholds are from its hepatitis B guideline for adults. Pointers to scarring risk, not diagnoses.

The Wai thresholds come from hepatitis C cohorts and the WHO ones from hepatitis B, so they are not interchangeable for an unexplained raised AST.

Wai's cutoffs were chosen to rule fibrosis out (the low one) or to make it likely (the high one). The WHO's Guidelines for the prevention, care and treatment of persons with chronic hepatitis B infection (2015) use a simpler pair for adults: above 0.5 for significant fibrosis, above 2 for cirrhosis.

The low end is the more useful half. In the groups it was tested on, a result at or below 0.5 makes significant scarring less likely. A result in the middle zone, roughly 0.5 to 1.5 for significant fibrosis, can neither confirm nor exclude scarring. Treat it as a prompt for a doctor's follow-up, not as reassurance.

When the number misleads

APRI was developed in chronic hepatitis C and is recommended by WHO for hepatitis B. Even in hepatitis C, its accuracy for moderate fibrosis is modest: a 2011 meta-analysis by Lin and colleagues (Hepatology) found a sensitivity of about 0.77 and a specificity of about 0.72 for significant fibrosis at a 0.7 cutoff. Outside hepatitis B and C the evidence is thinner, so a number from someone with an unexplained AST or another liver condition carries less weight.

Anything that moves AST or platelets for another reason bends the result:

  • A hard workout or muscle injury in the days before the draw can raise AST with no liver cause.
  • Heavy alcohol use, an acute viral illness or some medicines raise AST temporarily.
  • Low platelets can come from other causes entirely, such as certain drugs, immune conditions or pregnancy, which pushes APRI up.
  • High platelets from iron deficiency or inflammation do the opposite and can hide a real signal.

It is also one blood draw. A single value tells you little about the trend.

What if my APRI is above 0.5?

A number above 0.5 is worth taking to a doctor, more so if you have hepatitis B or C, drink heavily, have fatty liver or diabetes, or your AST and ALT have been raised on more than one test. They can repeat the bloods and add an ultrasound or an elastography scan (FibroScan), which measures liver stiffness directly. Jaundice, a swollen abdomen or dark urine are reasons not to wait for a routine appointment.

A result at or below 0.5 does not clear you if the cause of your liver strain is still there. A result in the middle zone leads to the same next step: ask what is driving the AST.

FIB-4 is a second index from the same labs (age, AST, ALT and platelets), and the two are often read together. You can try it in the FIB-4 calculator.

To see APRI in your own numbers, put AST, platelets and your lab's upper limit into the free APRI calculator, which shows the formula and the source paper. If you would rather not type, uploading the whole report to the HealthOSX blood tool works out every index the report allows, and a second upload later shows how each marker moved. The APRI calculator asks for your lab's upper AST limit, so check that the limit used matches the one printed on your report.

This is information, not medical advice. Talk to a doctor about what your results mean for you.

Get your blood testedThe HealthOSX Blood Test: a finger-prick kit at home in Germany, a nurse at home in Saudi Arabia, a partner lab elsewhere. Results right here.Blood Test

Written by

HealthOSX Research

Keep reading