All studies
Heart·November 8, 2026·5 min read

How Do I Convert Cholesterol From mmol/L to mg/dL and Why Is Triglyceride Different

Multiply cholesterol in mmol/L by 38.67 to get mg/dL. Triglycerides conventionally use 88.57 and glucose 18.02, because each factor is the molar mass divided by ten.

To convert cholesterol from mmol/L to mg/dL, multiply by 38.67: a total cholesterol of 5.2 mmol/L is about 201 mg/dL. Triglycerides use a different factor, 88.57, explained below.

Why one report says 5.2 and another says about 200

Same blood, two units. mg/dL measures the mass of a substance in a tenth of a litre. mmol/L counts molecules in a litre. Many countries print mg/dL and many print mmol/L. For example, the US and Germany typically print mg/dL, while the UK, Canada and Australia typically print mmol/L. A report in unfamiliar units can look as if your cholesterol is about 39 times higher, or your triglycerides about 89 times higher, when nothing in your blood changed at all.

To see which unit your report uses, look next to the value or in the reference range column. Compare your result with the lab's own reference range, in the lab's own units, and not with a range quoted in other units. A value outside the printed range is worth mentioning to your doctor, who will read it with your history. This page is information, not medical advice.

How to convert cholesterol from mmol/L to mg/dL by hand

Labs report total cholesterol, LDL, HDL and non-HDL as free-cholesterol equivalents, whatever the particle that carries it, so one factor applies to all of them.

  • mmol/L to mg/dL: multiply by 38.67.
  • mg/dL to mmol/L: divide by 38.67 (or multiply by 0.0259).

Worked examples:

  • Total cholesterol: 5.2 mmol/L is 201 mg/dL.
  • LDL: 3.0 mmol/L is 116 mg/dL.
  • HDL: 1.3 mmol/L is 50 mg/dL.

The cutoffs people quote line up the same way: 200 mg/dL is roughly 5.2 mmol/L, and 100 mg/dL is roughly 2.6.

For a head calculation, multiply by 40 and take off a few percent. 5.2 times 40 is 208, which is about 3% too high, close enough to know which side of a cutoff you are on.

Where 38.67 comes from

One millimole of cholesterol weighs 386.65 milligrams, because its molar mass is 386.65 g/mol (value from PubChem). A litre holds ten decilitres, so the amount per decilitre is a tenth of that: 38.67. The factor for any substance is its molar mass in g/mol divided by ten. For glucose, PubChem gives 180.16 g/mol, and divided by ten that is 18.02.

One rule, three factors
Molar mass (g/mol)Multiply mmol/L byExample
Cholesterol (total, LDL, HDL)386.6538.675.2 mmol/L = 201 mg/dL
Triglyceridesabout 885.7 (convention)88.571.7 mmol/L = 151 mg/dL
Glucose180.1618.025.5 mmol/L = 99 mg/dL

Scroll the table sideways for the rest →

Factor = molar mass in g/mol divided by 10. The triglyceride mass is a conventional approximation, not a measured value.

Why triglycerides need 88.57 instead

Cholesterol has one defined molar mass. A triglyceride is a glycerol backbone with three fatty acids attached, and those fatty acids differ in length and saturation from one triglyceride to the next. Your blood holds a mixture, so there is no single molar mass to divide.

The 88.57 factor corresponds to a triglyceride mass of about 885.7 g/mol. For comparison, triolein, a common triglyceride, is about 885.4 g/mol on PubChem. Because real triglycerides are a mixture, the factor is a convention, a working average and not a property measured in your sample.

The common mistake is using 38.67 on everything. Take triglycerides of 1.7 mmol/L. The usual conversion is about 151 mg/dL, which sits right at the common 150 cutoff. Use the cholesterol factor and you get 66, a number that looks excellent and is wrong by more than half.

Worked example: triglycerides of 1.7 mmol/L, converted two ways
Usual factor (88.57)151mg/dL
Wrong: cholesterol factor applied to triglycerides (38.67)66mg/dL

An illustration of the unit mistake, not a patient's result. The dashed line marks the common 150 mg/dL cutoff.

Going back, divide by 88.57: 150 mg/dL is 1.69 mmol/L.

Quick reference: both directions

  • Cholesterol (total, LDL, HDL): mmol/L × 38.67 = mg/dL. mg/dL ÷ 38.67 = mmol/L.
  • Triglycerides: mmol/L × 88.57 = mg/dL. mg/dL ÷ 88.57 = mmol/L.
  • Glucose: mmol/L × 18.02 = mg/dL. mg/dL ÷ 18.02 = mmol/L.
  • Friedewald LDL in mmol/L: the triglyceride divisor is about 2.2 (more exactly 2.18), in place of 5 in mg/dL.

The follow-up: does the LDL formula change too?

Yes, and this is the same factor problem in disguise. The Friedewald estimate (Friedewald, Levy and Fredrickson, Clin Chem 1972) calculates LDL as total cholesterol minus HDL minus triglycerides divided by 5, when everything is in mg/dL. In mmol/L the divisor becomes about 2.2.

The reason is the two factors. Triglycerides are converted with 88.57 and the other terms with 38.67, and 88.57 ÷ 38.67 is about 2.29. So the divisor 5 becomes 5 ÷ 2.29, which is about 2.2. Feed mmol/L numbers into the mg/dL version and your LDL comes out wrong.

Worked example with total cholesterol 5.2, HDL 1.3 and triglycerides 1.7 mmol/L:

  • In mmol/L: LDL = 5.2 − 1.3 − 1.7/2.2 = 3.13 mmol/L.
  • In mg/dL: total 201, HDL 50, triglycerides 151, so LDL = 201 − 50 − 151/5 = about 121 mg/dL.
  • Check: 3.13 mmol/L times 38.67 is also about 121 mg/dL.

You can run your own numbers in the LDL cholesterol calculator, which also offers the Sampson and Martin-Hopkins estimates. Friedewald loses accuracy as triglycerides rise, and it was not meant for values above about 400 mg/dL (4.5 mmol/L).

Other numbers where the simple answer breaks

  • Glucose: multiply mmol/L by 18.02. 5.5 mmol/L is 99 mg/dL and 7.0 is 126. HbA1c to average glucose is a separate relationship, fitted from data in the ADAG study (Nathan et al., Diabetes Care 2008), not a unit swap.
  • ApoB: g/L to mg/dL is a multiplication by 100, since it is only a change of mass unit.
  • Lipoprotein(a): nmol/L and mg/dL have no reliable conversion, because particle size varies between people. Do not convert it by hand.
  • Rounding: a printed 5.2 could be anything from 5.15 to 5.25, which is 199 to 203 mg/dL. A one or two point gap between two labs can be rounding alone.

Seeing it in your own numbers

If you would rather not do the arithmetic, start with the free blood test unit converter, which lists each marker's factor. Then, if you have a report, upload it for free blood test analysis and every marker is explained against ranges for your age and sex. Earlier reports are kept in your own browser, so the second upload must be in the same browser to show how each marker moved.

Get your blood testedThe HealthOSX Blood Test: a finger-prick kit at home in Germany, a nurse at home in Saudi Arabia, a partner lab elsewhere. Results right here.Blood Test

Written by

HealthOSX Research

Keep reading